Square-shaped FRP Cooling Towers with Thermal Efficiency, High Energy-saving, Easy Maintenance
Key Specifications/Special Features:
Characterized by airflow rate, low noise and energy consumption
Assembly up to 1200m3/hour (6x200m3/hour)
High temperature drop in industrial type
Can also be used in parallel, characterized by high speed airflow, noise slightly higher than assembly of tower, less than counter current tower and small footprint
Uses both sides of inlet, near top of fan through air on both sides of filler and mass transfer with hot water, hot/humid air back into tower
Fill used on both sides of point bump wave plate, through installation of wave plate bonding whole
Increase rigidity, bumps on both sides to avoid dripping water drops directly to opportunity to increase role of water film formation, tail with close packing of water measures
Fan: low speed and dynamic pressure of wing FRP fan blades
Uses polyester fiber with increased power, low noise and high transmission efficiency and not slipping water
Both sides of inlet, fills bottom of pool directly into distribution channel stack, no type of sound of dripping water counter current tower
Suitable for noise critical locations
Specifications: 80, 100, 125, 150, 175 and 200m3/hour
